3/8 x 3″ Bunk Bed Dowel Pins, Alloy Steel, Pack of 4
Pins are commonly used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. They are precision ground (unless noted) for more accurate alignment, and slightly oversized for a tight fit. To aid insertion, ends are beveled or rounded (unless noted). For a tight fit,your hole should be equal to or slightly smaller than the diameter shown. Breaking strength and Rockwell hardness are not rated (unlessnoted). Materials that have a breaking strength are measured as double shear, which is
Pins are commonly used as pivots, hinges, shafts, jigs, and fixtures to locate or hold parts. They are precision ground (unless noted) for more accurate alignment, and slightly oversized for a tight fit. To aid insertion, ends are beveled or rounded (unless noted). For a tight fit,your hole should be equal to or slightly smaller than the diameter shown. Breaking strength and Rockwell hardness are not rated (unlessnoted). Materials that have a breaking strength are measured as double shear, which is the force required to break a pin into three pieces.
Product Features
- Dowel Pins are grounded with a diameter tolerance of 0.0001″ to 0.0003″
- ASME B18.8.2
- Chamfered ends allow of easy insertion of dowel pins into any hole.
- All dowel pins come with a bright finish and a light protective coat of oil.
- Alloy Steel
){kind=link}
Comments
Comments are disabled for this post.